Advantech PCI-1730U User Manual download pdf (Page 4)

17-4

Signal Conditioning Modules and Terminal Boards

ADAM-3000 Series

Introduction

The ADAM-3000 Series consist of the most cost-efﬁcient,

ﬁeld conﬁgurable, isolation-based, signal conditioners

on the market today. The modules are easily installed to

protect your instruments and process signals from the

harmful effects of ground loops, motor noise, and other

electrical interferences.

Affordable Signal Isolation Solution

Featuring optical isolation technology, the ADAM-3000

modules provide three-way (input/output/power) 1,000

isolation. Optical isolation provides pin-point accuracy

and stability over a wide range of operations at minimal

power consumption.

Flexible Analog Data Conversion

The input/output range for the ADAM-3000 modules can

be conﬁgured through switches located inside the module.

The modules accept voltage, current, thermocouple or RTD

as input, and pass voltage or current as output.

Thermocouple input is handled by the built-in input

thermocouple linearization circuitry and a cold junction

compensation function. These ensure accurate temperature

measurement and accurate conversion of this information

to the voltage or current output.

Features

 1,000 V

three-way isolation

 Easy input/output range conﬁguration

 Flexible DIN-rail mounting

 Linearized thermocouple/RTD measurement

 Low power consumption

 Wide input bandwidth

Common Speciﬁcations

 Isolation 1,000 V

 Indicators Power LED indicator

 Power Requirement 24 V

± 10%

 Case ABS

 Screw Terminal Accepts 0.5 mm² ~ 2.5

1- #12 or 2- #14 ~ #22

AWG

 Operating Temperature 0 ~ 70° C (32 ~ 158° F)

(ADAM-3011: 0 ~ 50° C

(32 ~ 122° F))

 Storage Temperature -25 ~ 85° C

(-13 ~ 185° F)

Conﬁguration

The ADAM-3000 modules use 24 V

power. This electrical

power wiring can be acquired from adjacent modules,

which greatly simpliﬁes wiring and maintenance. The I/O

conﬁguration switches are located inside the modules.

To reach the switches, simply remove the modules from

the DIN-rail bracket by sliding the modules downward.

Modular Industrial Design

The ADAM-3000 modules can be easily mounted on

a DIN-rail, and signal wires can be connected through

screw terminals. The screw terminals and input/output

configuration switches are built inside the industrial

grade plastic casing. With simple two-wire input/output

cables, wiring is easy and reliable in harsh industrial

environments.

Applications

 Signal isolation

 Signal transmitters

 Thermocouple/RTD/strain gauge measurements

 Signal ampliﬁers

 Noise ﬁlter

1 2 3 4 5 6 7 8 9 ... 17 18

Comments to this Manuals

No comments

Advantech PCI-1730U User Manual Page 4

Comments to this Manuals

Related products and manuals for Interface cards/adapters Advantech PCI-1730U