Advantech PCI-1625U User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
10-5
Features
www.advantech.com/products
Online Download
8
5
44
10
ICOM
9
Motion Control
8
ADAM-3000
7
cPCI
6
DA&C
ATM & AWS
FPM
3
TPC
2
IPPC
1
Software
11
eConnectivity
12
UNO
13
ADAM-4000
14
ADAM-5000
15
ADAM-6000
16
ADAM-8000
17
BAS
2-port Isolated RS-232/Current-loop
PCI Communication Card
Two independent RS-232 or Current-loop serial ports
Each port can be individually configured to RS-232 or current-loop
16PCI952 FIFO UART (128-byte FIFO)
PCI bus specification 2.2 compliant
Speeds:
RS-232: 50 bps ~ 230.4 kbps
Current-loop: 57.6 kbps
I/O address automatically assigned by PCI Plug & Play
OS supported: Windows
®
98/ME/2000/XP/XP Embedded, Linux
®
Interrupt status register for increased performance
Powerful and easy-to use utility (ICOM Tools)
Universal PCI (Supports 3.3 V or 5 V PCI bus signal)
Specifications
General
Bus Type Universal PCI V 2.2
Certifications CE, FCC class A
Connectors 2 x DB9-M
Dimensions 123 x 92 mm (4.8” x 3.6”)
Power Consumption +5 V (250 ~ 300 mA)
Current-loop Interface
Baud-rate 50 ~ 57600 bps
Current Value 20 mA (Standard)
Mode Asynchronous, full duplex
Signal Driver/receiver 6N136
Signals TxD+, TxD-, RxD+, RxD-
Transmission Distance 1000 m
Communications
Communication 16PCI952
Controller
Data Bits 5, 6, 7, 8
Data Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI,GND
Current Loop: Tx+, Tx-, Rx+, Rx-
FIFO 128 bytes
Flow Control RTS/CTS, Xon/Xoff
IRQ Assigned by Plug & Play
Parity None, even, odd
Speed RS-232: 50 bps ~ 230.4 kbps
Current Loop: 50 bps ~57.6 kbps
Stop Bits 1, 1.5, 2
Software
Bundled Software ICOM Tools
Driver Support Windows 98/ME/2000/XP/XP embedded, Linux
Protection
ESD Protection 16 kV
Isolation Protection 3,000 V
DC
for RS-232 and current-loop
Environment
Humidity (Operating) 5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Operating Temperature 0 ~ 65° C (refer to IEC 68-2-1, 2) (32 ~ 149° F)
Storage Temperature -25 ~ 85° C (-13 ~ 185° F)
Ordering Information
PCI-1603 2-port Isolated RS-232/current-loop PCI Comm. Card
PCI-1603
Introduction
PCI-1603 offers a versatile range of high-speed interfacing options. You can switch its ports between the popular RS-232 or noise-resistant current-loop. The card utilizes 16PCI952
UARTs with 128-byte FIFO bu�
PCI-1603 provides two isolated RS-232 or current-loop serial ports. You can configure each port individually to RS-232 or current-loop using on-board jumpers.
The card utilizes 16PCI952 UART that buffers data into packets before sending it to the bus. This drastically reduces CPU load and avoids data loss when the system is busy and
cannot process an interrupt quickly. These FIFO buffers make the PCI-1603 especially suitable for high speed serial I/O under Windows.
Onboard optica�
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 25 26

Comments to this Manuals

No comments