Advantech PCA-6289 User Manual download pdf (Page 33)

23 Chapter 2

2.6.9 Onboard Parallel Port

This feature allows you to select the I/O address and IRQ for the onboard

parallel port. The default I/O address of 387h and IRQ of 7 should work

well in most cases. Unless you have a problem with the parallel port, you

should leave it at the default settings. The choices: 378/IRQ7, 278/IRQ5,

3BC/IRQ7, and Disabled.

2.6.10 Parallel Port Mode

The choices available include SPP, EPP, ECP and ECP+EPP.

2.6.11 ECP Mode Use DMA

When the on-board parallel port is set to ECP mode, the parallel port can

use DMA 3 or DMA 1.

After you have made your selections in the Integrated Peripherals setup,

press the

<ESC> key to go back to the main program screen.

2.6.12 Auto PWR-Failure Resume

This setting specifies whether your system reboots after a power failure.

There are three selections:

Off: The system will remain off when power comes back after a power

failure.

On: The system will switch on when power comes back after a power

failure.

Figure 2.6: Power Management Setup

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 67 68

No comments

Advantech PCA-6289 User Manual Page 33