Advantech PCM-9575 User Manual

iPCM-9575EBX VIA Eden/Ezra SBC with CPU,LCD, Ethernet, Audio, PCI and PC/104-PlusUsers Manual

x

PCM-9575 User’s Manual 90Step 5. Click the “Have Disk...” buttonStep 6. Type the path D:\Biscuit\9575\Audio\98se_Me_2k_xp\Win2000 press the “ok” but

91 Chapter 6 Audio SetupStep 8. Press “Next” buttonStep 9. Press “Finish” to reboot

PCM-9575 User’s Manual 92

93 Chapter 7 PCI Bus Ethernet Interface7PCI Bus Ethernet Interface This chapter provides information on Ethernet configuration.• Introduction• Instal

PCM-9575 User’s Manual 94Chapter 7 PCI Bus Ethernet Interface7.1 IntroductionThe PCM-9575 is equipped with a high performance 32-bit Ethernet chipse

95 Chapter 7 PCI Bus Ethernet Interface7.2.2 Installation for Windows 98Step 1. a. Select "Start", "Settings". "Control P

PCM-9575 User’s Manual 96Step 3. a. Select the "Adapter" item to add the Ethernet card.Step 4. a. Click "Have Disk" to install t

97 Chapter 7 PCI Bus Ethernet InterfaceStep 6. a. Choose the "Realtek RTL8139(A/B/C/8130) PCI Fast Ethernet" item.b. Click "OK"

PCM-9575 User’s Manual 987.2.3 Installation for Windows 2000Step 1. Open Device Manager,

99 Chapter 7 PCI Bus Ethernet InterfaceStep 2.

1 Chapter 1 General Information1General InformationThis chapter gives background information on the PCM-9575.Sections include: • Introduction• Featur

PCM-9575 User’s Manual 100Step 3. Step 4.

101 Chapter 7 PCI Bus Ethernet InterfaceStep 5. Step 6.

PCM-9575 User’s Manual 102Step 7. Step 8.

103 Chapter 7 PCI Bus Ethernet InterfaceStep 9. 7.2.4 Installation for Windows NTStep 1. a. Select "Start", "Settings", "

PCM-9575 User’s Manual 104b. Click "Next"Step 3. a. Click "Select from list..."

105 Chapter 7 PCI Bus Ethernet InterfaceStep 4. Click “Have Disk.”Step 5. a. Insert the Utility CD ROMb. Fill in the correct path:D:\Biscuit\9575\L

PCM-9575 User’s Manual 106Step 6. Check the highlighted item, and click “OK.”

107 Chapter 7 PCI Bus Ethernet Interface7. Click “Next” to continue setup.Step 8. Choose the networking protocols, then click "Next"

PCM-9575 User’s Manual 108Step 9. Select the correct Network Services then click "Next"Step 10. Click “Next” to continue setup.

109 Chapter 7 PCI Bus Ethernet Interface11. Click “Next” to start the network.7.3 Further informationRealtek website: www.realtek.com.twIntel web

PCM-9575 User’s Manual 2Chapter 1 Introduction1.1 IntroductionThe PCM-9575 is a VIA low-power Eden/Ezra processor single board computer (SBC) with au

PCM-9575 User’s Manual 110

111 Appx. A AProgramming the Watchdog TimerThe PCM-9575 is equipped with a watchdog timer that resets the CPU or generates an interrupt if processing

TPC-642 User’s Manual 112Appendix A Programming the Watchdog TimerA.1 Supported Input Timing ModesIn order to program the watchdog timer, you must w

113 Appx. A The following example shows how you might program the watchdog timer in BASIC:10 REM Watchdog timer example program20 OUT &H443, data

TPC-642 User’s Manual 114

115 Appx. B BInstalling PC/104-Plus ModulesThis appendix gives instructions for installing PC/104- Plus modules.Appendix

TPC-642 User’s Manual 116Appendix B Installing PC/104-Plus ModulesB.1 Installing PC/104-Plus ModulesThe PCM-9575's PC/104 connectors give you t

117 Appx. B Figure B.1: PC/104+ module mounting diagram

TPC-642 User’s Manual 118Figure B.2: PC/104+ module dimensions (mm) (±0.1)

119 Appx. C CPin AssignmentsThis appendix contains information of a detailed or specialized nature. It includes:• CPU Fan Power Connector• Ethernet 1

3 Chapter 1 General Information1.2 Features• Embedded VIA low-power Eden/Ezra processor• EBX form factor which supports both PC/104-Plus and PCI slo

PCA-6183 User’s Manual 120Appendix C Pin AssignmentsC.1 CPU Fan Power Connector (FAN 1)C.2 Ethernet 10/100Base-T Connector (CN12)Table C.1: IR conne

121 Appx. C C.3 Audio Connector (CN4)C.4 Audio In Connector (CN2)Table C.3: Audio connector (CN4)Pin Signal Pin Signal1 SPEAKER OUT R+ 2 SPEAKER OUT

PCA-6183 User’s Manual 122C.5 Main Power Connector (CN5)Table C.5: Main Power Connector (CN5)Pin Signal1+5 V2GND3GND4+12 V5N.C.6GND7+5 V

123 Appx. C C.6 Keyboard and PS/2 Mouse Connector (CN25)Table C.6: Keyboard and mouse connector (CN25)Pin Signal1 KB CLOCK2 KB DATA3MS CLOCK4GND5 +5V

PCA-6183 User’s Manual 124C.7 Floppy Disk Drive Connector (CN18)Table C.7: Floppy Disk Drive Connector (CN18)Pin Signal Pin Signal1 GND 2 DENSITY SELE

125 Appx. C C.8 PC/104 plus Connectors (CN17) Table C.8: PC/104+ connectors (CN17)PinNumberRow ARow BRow CRow D1 IOCHCHK* GND GND GND2 SD7 RES

PCA-6183 User’s Manual 12623 SA8 IRQ5 ---- ----24 SA7 IRQ4 ---- ----25 SA6 IRQ3 ---- ----26 SA5 DACK2* ---- ----27 SA4 TC ---- ----28 SA3 BALE ---- --

127 Appx. C C.9 IDE Hard Drive Connector (CN14, CN16) Table C.9: IDE HDD connector (CN14, CN16)Pin Signal Pin Signal1 IDE RESET* 2 GND3DATA 7 4DATA

PCA-6183 User’s Manual 128C.10 Parallel Port Connector (CN15) Table C.10: Parallel Port Connector (CN15)Pin Signal Pin Signal1 STROBE* 2 AUTOFD*3D0

129 Appx. C C.11 Power & HDD LED Connector(CN13) C.12 Reset Button Connector (CN22) Table C.11: Power & HDD LED Connector (CN1

PCM-9575 User’s Manual 4• Enhanced IDE interface: Two channels supports up to four EIDE devices. BIOS auto-detect, PIO Mode 3 or Mode 4, UDMA 33 trans

PCA-6183 User’s Manual 130C.13 USB Connector (CN20, CN28) C.14 LCD Inverter Backlight Connector (CN6) Table C.13: USB Connector (CN

131 Appx. C C.15 IR Connector (CN24) C.16 CRT Display Connector (CN8) Table C.15: IR Connector (CN24)Pin Signal1 VCC (5 V)2N.C.3IR r

PCA-6183 User’s Manual 132C.17 TV (video) Out Connector (CN1) Table C.17: TV (video) Out Connector (CN1)Pin Signal1 Luminance out (S-Video Y out

133 Appx. C C.18 Flat Panel Connector (CN11) Table C.18: Flat Panel Connector (CN11)Pin Signal Pin Signal1 VDDSAFE5 (+5v output) 2 VDDSAFE5 (+

PCA-6183 User’s Manual 134C.19 Extended Flat Panel Display Connector (CN10) Table C.19: Extended Flat Panel Display Connector (CN10)Pin Signal Pin S

135 Appx. C C.20 LCD Signal Mapping Table C.20: LCD Signal MappingPin Name16-bit DSTN24-bit DSTN18-bit TFT24-bit TFT36-bit TFTPD0 LB3 B0 R00PD1 LB

PCA-6183 User’s Manual 136C.21 LVDS Connector (CN9) C.22 Peripheral Power Connector (CN27) Table C.21: LVDS Connector (CN9)Pin Signal Pin Signa

137 Appx. C C.23 COM Port Connector (CN19) Table C.23: COM Port Connector (CN19)Pin Signal Pin Signal1 RLSD1 (DCD1) 2 DSR13RX1 4RTS15TX1 6CTS17

PCA-6183 User’s Manual 138C.24 CompactFlash Card Connector (CN26) Table C.24: CompactFlash Card Connector (CN26)Pin Signal Pin Signal1GND 2D033D04

139 Appx. C C.25 ATX Power Feature Connector (CN3) Table C.25: ATX Power Feature Connector (CN3)Pin Signal1 5VSB (Stand by voltage)2GND3 PS. ON#

5 Chapter 1 General InformationProvides Composite video and S-video outputs via RCA (composite) connector and S-video connectorSupports 640 x 480 and

PCA-6183 User’s Manual 140

141 Appx. D DSystem AssignmentsThis appendix contains information of a detailed nature. It includes:• System I/O ports• 1st MB memory map• DMA channe

PCA-6183 User’s Manual 142Appendix D System AssignmentsD.1 System I/O PortsTable D.1: System I/O portsAddr. range (Hex) Device000-01F DMA controller

143 Appx. D D.2 1st MB memory mapD.3 DMA channel assignmentsTable D.2: 1st MB memory mapAddr. range (Hex) DeviceF0000h - FFFFFh System ROM*CC000h - E

PCA-6183 User’s Manual 144D.4 Interrupt assignmentsTable D.4: Interrupt assignmentsInterrupt# Interrupt sourceIRQ 0 Interval timerIRQ 1 KeyboardIRQ 2

145 Appx. E EOptional Extras for the PCM-9575Appendix

PCM-9575 User’s Manual 146E.1 PCM-10586-5A00 cable kit for PCM-9575The PCM-9575 requires several cables for normal operation. You can make them yourse

147 Appx. E E.2 Optional LCD cables 10.4" TFT LCD panel (CN14)E.3 Optional USB cable (CN20)Optional USB cable (2-channel) Part no: 1703100261Opt

PCM-9575 User’s Manual 148

149 Appx. F FMechanical DrawingsAppendix

PCM-9575 User’s Manual 61.4 Board layout: dimensionsFigure 1.1: Board layout: dimensions

PCM-9575 User’s Manual 150F.1 Mechanical DrawingsFigure F.1: PCM-9575 Mechanical Drawing (Side view for PCM-9575F-Q0A1 (w/ fan) and PCM-9575F-M0A1(w/

151 Appx. F Figure F.2: PCM-9575 Mechanical Drawing (component side)

PCM-9575 User’s Manual 152Figure F.3: PCM-9575 Mechanical Drawing (solder side)

7 Chapter 2 Installation2InstallationThis chapter explains the setup procedures of PCM-9575 hardware, including instruc-tions on setting jumpers and

PCM-9575 User’s Manual 8Chapter 2 Installation2.1 JumpersThe PCM-9575 has a number of jumpers that allow you to configure your system to suit your a

9 Chapter 2 InstallationCN8 CRT display connectorCN9 LVDS connectorCN10 Ext. flat panel connectorCN11 Flat panel connectorCN12 Ethernet connector CN1

PCM-9575 User’s Manual iiCopyrightThis document is copyrighted, © 2002. All rights are reserved. The orig-inal manufacturer reserves the right to mak

PCM-9575 User’s Manual 102.3 Locating jumpersFigure 2.1: Jumper locations

11 Chapter 2 Installation2.4 Locating ConnectorsFigure 2.2: Connectors (component side)

PCM-9575 User’s Manual 122.5 Setting JumpersYou may configure your card to match the needs of your application by setting jumpers. A jumper is a meta

13 Chapter 2 Installation2.6 Clear CMOS (JP4)This jumper is used to erase CMOS data and reset system BIOS informa-tion.The procedure for clearing CM

PCM-9575 User’s Manual 142.7 Installing DIMMsThe procedure for installing DIMMs is described below. Please follow these steps carefully. The number o

15 Chapter 2 Installation(See your hard drive’s documentation for the location of the con-nector.)If desired, connect a second drive as described abo

PCM-9575 User’s Manual 16If you are connecting a 3.5” floppy drive, you may have trouble determin-ing which pin is number one. Look for a number print

17 Chapter 2 Installationthem. The front panel connector (CN13) is an 8-pin male, dual in-line header. It provides connections for a speaker, hard di

PCM-9575 User’s Manual 182.16 IR connector (CN24)This connector supports the optional wireless infrared transmitting and receiving module. This modul

19 Chapter 2 Installation2.17.1 Audio connector (CN4)The PCM-9575 provides all major audio signals on a 16-pin flat-cable connector, CN4. These audio

iiiPacking List Before you begin installing your card, please make sure

PCM-9575 User’s Manual 202.19 VGA/LCD/LVDS interface connectionsThe PCM-9575’s PCI SVGA interface can drive conventional CRT dis-plays and is capable

21 Chapter 2 InstallationS1 is an 8 segment DIP switch for DSTN/TFT panel type and resolution functions.2.20 TV-out interface (optional) (CN1)

PCM-9575 User’s Manual 222.21 Ethernet configurationThe PCM-9575 is equipped with a high performance 32-bit PCI-bus Ethernet interface which is fully

23 Chapter 2 Installationinvolves one jumper and running the control software (refer to Appendix A).2.22.1 Watchdog timer action (JP5)When the watchd

PCM-9575 User’s Manual 24

25 Chapter 3 Software Configuration3Software ConfigurationThis chapter details the software configura-tion information. It shows you how to config-ur

PCM-9575 User’s Manual 26Chapter 3 Software Configuration3.1 IntroductionThe PCM-9575 system BIOS and custom drivers are located in a 256 Kbyte, Fla

27 Chapter 3 Software Configuration3.2 Connections to Three Standard LCDsThe following tables illustrate typical LCD connection pinouts for the PCM-

PCM-9575 User’s Manual 283.2.2 Connections to Toshiba LTM15C151A (1024 x 768 TFT color LCD)28 B5 16 P729 GND 3 GND30 VDD 1 +5 V31 VDD 2 +5 VTable 3.2:

29 Chapter 3 Software Configuration3.2.3 Connections to Toshiba LTM12C275A (800 x 600 TFT color LCD)CN1-25 OB5 CN 10-13 PD34CN1-26 ENAB CN 11-37 M/DE

PCM-9575 User’s Manual iv

PCM-9575 User’s Manual 303.3 Ethernet software configuration The PCM-9575’s on-board Ethernet interface supports all major network operating systems.

31 Chapter 3 Software ConfigurationNote For Ethernet installation, please see Chapter 7

PCM-9575 User’s Manual 32

33 Chapter 4 Award BIOS SetupChapter 4 Ducks that Need Love!4Award BIOS SetupThis chapter describes how to set BIOS configuration data.CHAPTER

PCM-9575 User’s Manual 34Chapter 4 Award BIOS Setup4.1 System test and initializationThese routines test and initialize board hardware. If the routi

35 Chapter 4 Award BIOS Setup4.2 Award BIOS setupAward’s BIOS ROM has a built-in Setup program that allows users to modify the basic system configur

PCM-9575 User’s Manual 364.2.2 Standard CMOS Features setupWhen you choose the Standard CMOS Features option from the Initial Setup Screen menu, the

37 Chapter 4 Award BIOS Setup4.2.3 Advanced BIOS Features setupBy choosing the Advanced BIOS Features Setup option from the Initial Setup Screen men

PCM-9575 User’s Manual 384.2.4 Advanced Chipset Features setupBy choosing the Advanced Chipset Features option from the Initial Setup Screen menu, th

39 Chapter 4 Award BIOS Setup4.2.5 Integrated PeripheralsChoosing the Integrated Peripherals option from the Initial Setup Screen menu should produc

Table of ContentsvContentsChapter 1 General Information ...11.1 Introduction ...

PCM-9575 User’s Manual 404.2.7 PnP/PCI ConfigurationsBy choosing the PnP/PCI Configurations option from the Initial Setup Screen menu, the screen bel

41 Chapter 4 Award BIOS Setup4.2.9 Frequency/Voltage ControlBy choosing the Frequency/Voltage Control option from the Initial Setup Screen menu, the

PCM-9575 User’s Manual 424.2.10 Load Optimized DefaultsLoad Optimized Defaults loads the default system values directly from ROM. If the stored recor

43 Chapter 4 Award BIOS Setup3. At the “Confirm Password” prompt, retype the desired password, then press <Enter>.4. Select Save to CMOS and EX

PCM-9575 User’s Manual 444.2.13 Exit Without SavingSelecting this option and pressing <Enter> lets you exit the Setup pro-gram without recordin

45 Chapter 5 PCI SVGA Setup5PCI SVGA Setup • Introduction• Installation of SVGA drivers -for Windows 95/98/Me-for Windows NT/2000/XP• Further informa

PCM-9575 User’s Manual 46Chapter 5 PCI SVGA Setup5.1 IntroductionThe PCM-9575 has an onboard AGP flat panel/VGA interface. The spec-ifications and f

47 Chapter 5 PCI SVGA Setup5.1.4 Dual/Simultaneous DisplayThe PCM-9575 uses a VIA Twister VT8606T LCD controller that is capable of providing simult

PCM-9575 User’s Manual 485.2 Installation of the SVGA DriverComplete the following steps to install the SVGA driver. Follow the pro-cedures in the fl

49 Chapter 5 PCI SVGA SetupStep 2. Choose the "Adapter" tab, then press the "Change..." button.Step 3. Press the "Have Dis

vi2.14.2Main power connector, +5 V, +12 V (CN5) ... 172.14.3CPU Fan power supply connector (FAN1) ...

PCM-9575 User’s Manual 50Step 4. Type in the path: D:\Biscuit\9575\VGA\Win9x_MeStep 5. Select the highlighted item, and click the "OK" but

51 Chapter 5 PCI SVGA SetupStep 6. "S3 GraphicsTwister" appears under the adapter tab. Click the "Apply" button, then the "

PCM-9575 User’s Manual 525.2.2 Installation for Windows 98/MeStep 1. Select "Start", "Settings", "Control Panel", &quo

53 Chapter 5 PCI SVGA SetupStep 2. Select “Adapter,” then “Change.”

PCM-9575 User’s Manual 54Step 3. Press “Next,” then “Display a list...”Step 4. Press the “Have disk...” button.

55 Chapter 5 PCI SVGA SetupStep 5. Insert the CD into the CD-ROM drive. Type in the pathD:\Biscuit\9575\VGA\Win9x_MeThen press “OK”Step 6. Select t

PCM-9575 User’s Manual 56Step 7. "S3 Graphics Twister"appears under the adapter tab. Click the "Apply" button.Step 8. Press “Yes

57 Chapter 5 PCI SVGA Setup5.2.3 Installation for Windows NTStep 1. Select "Start", "Settings", "Control Panel" and d

PCM-9575 User’s Manual 58Step 2. Choose the "Settings" tab, and press the "Display Type" button.

59 Chapter 5 PCI SVGA SetupStep 3. Press the "Change..." button.

Table of ContentsviiChapter 4 Award BIOS Setup...334.1 System test and initialization...

PCM-9575 User’s Manual 60Step 4. Click the "Have Disk..." button.Step 5. Type the path: D:\Biscuit\VGA\WinNTPress the "OK" butto

61 Chapter 5 PCI SVGA SetupStep 6. Select the highlighted item, and click the "OK" button.Step 7. Press "Yes" to proceed.Step 8

PCM-9575 User’s Manual 625.2.4 Installation for Windows 2000Step 1. Select "System", "Settings", "Control Panel" and d

63 Chapter 5 PCI SVGA SetupStep 2. Choose the "Video Controller (VGA Compatible)” button.

PCM-9575 User’s Manual 64Step 3. Choose the "Drive" button, press “Update Driver...” button.

65 Chapter 5 PCI SVGA SetupStep 4. Choose "Display a list of..." , then press “Next” button.Step 5. Choose “Display adapters”, press “Nex

PCM-9575 User’s Manual 66Step 6. Click the “Have Disk” button.Step 7. Type the path D:\Biscuit\9575\VGA\Win2000 press the “OK” button.

67 Chapter 5 PCI SVGA SetupStep 8. Press “Finish" to reboot.5.2.5 Installation for Windows XPStep 1. Select "System", "Setting

PCM-9575 User’s Manual 68Step 2. Choose “Hardware” and “Device Manager”, press “OK” button.

69 Chapter 5 PCI SVGA SetupStep 3. Choose “Video Controller (VGA Compatible), press “OK” but-ton.

viiiChapter 6 Audio Setup...756.1 Introduction ...

PCM-9575 User’s Manual 70Step 4. Choose "Driver”, “Update Driver”, press “OK” button.Step 5. Choose “Install from a list...” , press “Next”.

71 Chapter 5 PCI SVGA SetupStep 6. Choose “Don’t search. I will...”, press “Next” button.Step 7. Choose “Display adapters”, press “Next” button.

PCM-9575 User’s Manual 72Step 8. Type the path D:\Biscuit\9575\VGA\WinXP then press “OK” button.Step 9. Choose “S3 Graphics Twister + S3 Hotkey” th

73 Chapter 5 PCI SVGA SetupStep 10. Press “Finish" to reboot.5.3 Further InformationFor further information about the AGP/VGA installation in

PCM-9575 User’s Manual 74

75 Chapter 6 Audio Setup6Audio SetupThe PCM-9575 is equipped with an audiointerface that records and plays back CD-quality audio. This chapter provid

PCM-9575 User’s Manual 76Chapter 6 Audio Setup6.1 IntroductionThe PCM-9575's on-board audio interface provides high-quality stereo sound and FM

77 Chapter 6 Audio Setup6.2.2 VIA Sound Blaster InstallationFollow these steps to enable the Sound Blaster Pro compatible functions.Step 1. Enable

PCM-9575 User’s Manual 786.3.2 Windows 95/98 driversStep 1. Click "Start" and select "Settings". Click "Control Panel"

79 Chapter 6 Audio SetupStep 3. In the following Add New Hardware Wizard window, click "Next" for Windows to search for Plug and Play devi

Table of ContentsixC.17 TV (video) Out Connector (CN1) ... 132C.18 Flat Panel Connector (CN11) ...

PCM-9575 User’s Manual 80Step 5. In the following Add New Hardware Wizard window, select "No, I want to select..." and click "Next&quo

81 Chapter 6 Audio SetupStep 7. In the following Add New Hardware Wizard window, click "Have Disk...".Step 8. In the Install From Disk wi

PCM-9575 User’s Manual 82Step 9. In the Open window, select "D:\Biscuit\9575\Audio\98se_Me_2k_xp\WIN95_98.Step 10. In the Install From Disk win

83 Chapter 6 Audio SetupStep 11. In the Select Device window, select "VIA PCI Audio Controller (WDM)" and click "OK".Step 12. I

PCM-9575 User’s Manual 84Step 13. The Copying Files... window will appear.Step 14. In the Add New Hardware Wizard window, click "Finish".

85 Chapter 6 Audio Setup6.3.3 Windows NT driversStep 1. Click "Start" and select "Settings". Click "Control Panel" an

PCM-9575 User’s Manual 86Step 3. In the Add window, select the "Unlisted..." item and click "OK".Step 4. When the Install Driver

87 Chapter 6 Audio SetupStep 5. In the Add Unlisted or Updated Driver window, select the "VIA PCI Audio controller" item. Then click "

PCM-9575 User’s Manual 886.3.4 Windows 2000 DriversStep 1. Select “System”, “Setting”, “Control Panel” and double click “system” icon.Step 2. Choos

89 Chapter 6 Audio SetupStep 3. Choose “Driver button, press “Update Driver” button.Step 4. Choose “Sound, video and game controllers”, press “Next