Advantech I/O Module 5000 Series User Manual download pdf (Page 15)

9 APAX-5000 I/O Series User Manual

Chapter 1 Overview

1.7 Mechanical Assembly and Power Connection

1.7.1 Wiring Power Input to the Backplane

There are two ways that APAX-5000 I/O mdoules can be powered. One is to connect

the DC power supply wire directly to the power connector on the backplane. Another

way is using APAX-5343E power supply module.

When you wire the power supply to the backplane, the power is transferred between

backplanes, and provides to all APAX-5000 I/O modules inserted on the backplanes.

Refer to figures below for how to wiring the power to the backplane, and how to

assembly APAX-5000 I/O modules with backplanes:

1. Connect the power supply wire to the power connectors on the 2-slot APAX-

5002 backplane module.

2. Insert one APAX-5000 I/O module on that APAX-5002 backplane module.

Warning! If you use APAX-5000 digital modules in the same system, use different

power supplies for the system and the the digital channels on the mod-

ules to ensure isolation protection between digital channels and system.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 65 66

No comments

Advantech I/O Module 5000 Series User Manual Page 15