Advantech FPM-3150G Series User Manual

FPM-2150 SeriesFlat Panel Monitor with15" Color TFT/LCD DisplayUser Manual

FPM-2150 Series User Manual x

2CHAPTER 1IntroductionThis chapter includes:• Introduction• Specifications• LCD Specification• Power Consumption• Connectors• Dimensions

FPM-2150 Series User Manual 2Chapter 1 Introduction1.1 IntroductionAdvantech's FPM-2150 Series consists of 15" color TFT LCD flat panel mo

3 Chapter 1 • Vibration (operating): 5 ~ 17 Hz, double-amplitude displacement; 17 ~ 500 Hz, 1.0 G peak to peak• CE, FCC, BSMI, CCC certified• Powe

FPM-2150 Series User Manual 41.5 ConnectorsThe following connectors are situated on the bottom of the FPM-2150 Series:VGA Port (DB-15)This DB-15 conn

5 Chapter 1 1.5.1 PS/2 ConnectorsThe FPM-2150 provides two PS/2 connectors in the bottom side. Please follow the steps to connect the keyboard /mouse

FPM-2150 Series User Manual 61.6 DimensionsFigure 1.1: FPM-2150GA Chassis Dimensions100.00[3.94]75.00[2.95]48.13[1.89]29.00[1.14]15.00[0.59]215.10[8.

2CHAPTER 2System Setup• Mounting the Monitor• Wall / Panel / Rack Mounting• Desktop / Swing-Arm Mounting

FPM-2150 Series User Manual 8Chapter 2 System Setup2.1 Mounting FPM-2150The FPM-2150 Series can be flexibly mounted. The versatility of the FPM-2150

9 Chapter 2 2.1.2 Panel MountingRefer to figure 2.2 and follow the instructions below to install in a panel.1. Place four panel-mounting brackets on

FPM-2150 Series User Manual iiCopyright NoticeThis document is copyrighted by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserve

FPM-2150 Series User Manual 102.2 Desktop, Swing-ARM for FPM-2150The FPM-2150 can also be mounted in other ways. You can use the desk-top stand for d

11 Chapter 2 2.2.2 Swing-ARM (designed to meet VESA ARM stan-dard)FPM-2150 has been designed with support for the VESA arm standard. Refer to figure

FPM-2150 Series User Manual 122.2.3 Power AdapterThe power adapter bracket is attached to the rear of FPM-2150. Detach the small bracket at the rear s

2 APPENDIX ADisplay Timing Mode and OSD

FPM-2150 Series User Manual 14Appendix A Display Timing Mode & OSDA.1 Supported Input Timing ModesThe different frequencies below are already pr

15 Appendix A A.2 Keypad InterfaceA.3 Power Indicator LED StatusThe keypad interface provides a driver for a dual color LED to indicate status.(1)

FPM-2150 Series User Manual 16A.4 OSD FunctionEach selected value is stored into LCD memory after SEL signal input or time out. The stored values are

2 APPENDIX BTouchscreenThis appendix contains information on the touchscreen, its installation and configuration.

FPM-2150 Series User Manual 18Appendix B TouchscreenB.1 IntroductionThe FPM-2150 Series’ optional touchscreen uses advanced 8-wire resis-tive techno

19 Appendix B Optical• Visible light transmission: 75% typical (>74% @ 550 nm test)• Clarity: Clear Finish - 25%, Antiglare Finish - 15%Sensor

iiiProduct Warranty (1 year)Advantech warrants to you, the original purchaser, that each of its prod-ucts will be free from defects in materials and w

FPM-2150 Series User Manual 20Before installing the Windows 2000/XP driver software, you must have the Windows 2000/XP system installed and running on

21 Appendix B 2. Insert the PenMount Driver CD-ROM. Go to the Windows 2000-XP Driver folder. Click setup.exe.3. The screen displays the installation

FPM-2150 Series User Manual 224. A License Agreement appears. Click “I accept…” and “Next”5. The “Ready to Install the Program” screen appears. Select

23 Appendix B 6. The next screen is “Hardware Installation.” Select “Continue Any-way.”7. The “InstallShield Wizard Completed” appears. Click “Finish

FPM-2150 Series User Manual 24B.4 Configuring PenMount Windows 2000/XP DriverUpon rebooting, the computer automatically finds the new 9000 control-le

25 Appendix B NOTE: The older the touch screen, the more Advanced Mode calibration points you need for an accurate calibration. Use a stylus during A

FPM-2150 Series User Manual 26

27 Appendix B Plot Calibra-tion DataCheck this function and a touch panel linearity com-parison graph appears when you have finished Advanced Calibra

FPM-2150 Series User Manual 28DrawTests or demonstrates the PenMount touch screen operation. The display shows touch location. Click Draw to start. To

29 Appendix B Multiple MonitorsMultiple Monitors supports from two to six touch screen displays for one system. The PenMount drivers for Windows 2000

FPM-2150 Series User Manual ivFCC Class BThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

FPM-2150 Series User Manual 302. When the mapping screen message appears, click OK.3. Touch each screen as it displays “Please touch this monitor.” Fo

31 Appendix B 4. Touching all screens completes the mapping and the desktop reap-pears on the monitors.5. Select a display and execute the ‘Calibrati

FPM-2150 Series User Manual 32OptionThis panel function supports two modes—Operation Mode and Beep Sound Mode—which allow configuration for specific t

33 Appendix B AboutThis panel displays information about the PenMount controller and driver version.

FPM-2150 Series User Manual 34B.4.2 PenMount Monitor Menu IconThe PenMount monitor icon (PM) appears in the menu bar of Windows 2000/XP system when yo

35 Appendix B B.4.3 PenMount Rotating FunctionsThe PenMount driver for Windows 2000/XP supports several display rotating software packages. Please se

FPM-2150 Series User Manual 36B.5 Uninstall the PenMount Windows 2000/XP driver1. Exit the PenMount monitor (PM) in the menu bar. 2. Go to Settings,

vPacking ListBefore installing your equipment, make sure that the following materials have been received:• FPM-2150 Series flat panel monitor• Acc

FPM-2150 Series User Manual viSafety Instructions1. Read these safety instructions carefully.2. Keep this User's Manual for later reference.3.

viiBELOW -20° C (-4° F) OR ABOVE 60° C (140° F). THIS MAY DAMAGE THE EQUIPMENT.The sound pressure level at the operator's position according to I

FPM-2150 Series User Manual viii13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elek-trischen Sicherheit nur von authorisiertem Servi

ix Table of Contents ContentsChapter 1 Introduction .............. 21.1 Introduction .......