Advantech AIMB-582 User Manual download pdf (Page 24)

AIMB-582 User Manual 14

2.1 Introduction

You can access most of the connectors from the top of the board as it is being

installed in the chassis. If you have a number of cards installed or have a packed

chassis, you may need to partially remove the card to make all the connections.

2.2 USB Ports (LAN1_USB01/LAN2_USB23/USB45/

USB89/USB1011/USB1213)

The AIMB-582 provides up to 12 USB ports. The USB interface complies with USB

Specification Rev 2.0 supporting transmission rates up to 480 Mbps and Rev 3.0 sup-

porting transmission rate up to 5 Gbps and is fuse protected. The USB interface can

be disabled in the system BIOS setup.

The AIMB-582 is equipped with two high-performance 1000 Mbps Ethernet LAN

adapters, both of which are supported by all major network operating systems. The

RJ-45 jacks on the rear panel provides convenient LAN connection.

Table 2.1: LAN LED Indicator

LAN Mode LAN Indicator

LAN1 indicator

LED1 (Right) off for mal-link; Link (On) / Active (Flash)

LED2 (Left) 100 Mbps (On) / 10 Mbps (Off)

LED2 (Left) 1000 Mbps (On)

LAN2 indicator

LED1 (Right) off for mal-link; Link (On) / Active (Flash)

LED2 (Left) 100 Mbps (On) / 10 Mbps (Off)

LED2 (Left) 1000 Mbps (On)

LAN1_USB12 LAN2_USB34

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 115 116

No comments

Advantech AIMB-582 User Manual Page 24