Advantech PCM-3362 User Manual download pdf (Page 29)

21 PCM-3362 User Manual

Chapter 3 AMI BIOS Setup

Intel® C-STATE tech

This item allows the CPU to save more power under idle mode.

Enhanced C-States

CPU idle set to enhanced C-States, disabled by Intel® C-STATE tech item.

3.3.2 IDE Configuration

Figure 3.5 IDE Configuration

ATA/IDE Configuration

This item allows you to select Disabled / Compatible / Enhanced.

Legacy IDE Channels

When set to Enhanced mode you can select IDE or AHCI mode. When select Com-

patible mode you can select SATA only / SATA pri, PATA sec or PATA only.

Primary/Secondary/Third IDE Master

BIOS auto detects the presence of IDE device, and displays the status of auto detec-

tion of IDE device.

 Type: Select the type of SATA driver.[Not Installed][Auto][CD/DVD][ARMD]

 LBA/Large Mode: Enables or Disables the LBA mode.

 Block (Multi-Sector Transfer): Enables or disables data multi-sectors trans-

fers.

 PIO Mode: Select the PIO mode.

 DMA Mode: Select the DMA mode.

 S.M.A.R.T.: Select the smart monitoring, analysis, and reporting technology.

 32Bit Data Transfer: Enables or disables 32-bit data transfer.

Hard Disk Write Protect

Disable/Enable device write protection. This will be effective only if device is

accessed through BIOS.

IDE Detect Time Out (Sec)

This item allows you to select the time out value for detecting ATA/ATAPI device(s).

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 87 88

No comments

Advantech PCM-3362 User Manual Page 29