Advantech PCI-1730 User Manual download pdf (Page 11)

3 PCIE-1730 User Manual

Chapter 1 Overview

Board ID

The PCIE-1730 has a built-in DIP Switch that helps define each card’s ID when multi-

ple PCIE-1730 cards have been installed on the same PC chassis. The board ID set-

ting function is very useful when users build their system with multiple PCIE-1730

cards. With correct Board ID settings, you can easily identify and access each card

during hardware configuration and software programming.

Reset Protection

When the system has undergone a hot reset (i.e. without turning off the system

power), the PCIE-1730 can either retain outputs values of each channel, or return to

its default configuration as open status, depending on its on-board jumper setting.

This function protects the system from wrong operations during unexpected system

resets.

1.3 Applications

 Industrial ON/OFF control

 Switch status sensing

 BCD interfacing

 Digital I/O control

 Industrial and lab automation

 Laboratory & Education

1.4 Installation Guide

Before you install your PCIE-1730 card, please make sure you have the following

necessary components:

 PCIE-1730 card

 PCIE-1730 User’s Manual

 Advantech driver DAQNavi (included in the CD-ROM)

 Wiring cable PCL-10137 (option)

 Wiring board PCLD-880, ADAM-3937 (option)

 Personal computer or workstation with a PCI Express-bus slot

Some other optional components are also available for enhanced operation:

 Application software: Advantech Navigator (Utility) offered by DAQNavi soft-

ware.

After you get the necessary components and maybe some of the accessories for

enhanced operation of your card, you can then begin the Installation procedures.

Note! For detailed specifications of the PCIE-1730, refer to Appendix A, Spec-

ifications.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

Advantech PCI-1730 User Manual Page 11