Advantech PCE-7210 User Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
PCE-7210 User Manual 2
Chapter 1 Hardware Configuration
1.1 Introduction
The PCE-7210 is designed with the Intel® E7520 chipset and 6300ESB
(I/O controller) to support sever grade Intel® Dual Xeon® / LV Xeon®
(FSB 800) Processor. It follows the PICMG 1.3 specification and is the
best solution for high computing performance and wide I/O bandwidth
demand applications.
Besides supports Dual Intel® Xeon® / LV Xeon® CPUs Intel® E7520
also provides three PCIe x8 Links which I/O bandwidth is up to 12 GB/s.
With this feature PCE-7210 provide two x8 Links and one x4 Link to the
PICMG 1.3 backplane, it offers up to 10 GB/s bandwidth for the back-
plane. It allows the backplane configure to variant expansion I/O slot
such as PCI-express slots thru the PCIe to PCIe Switch Chips or PCI-X
slots by PCIe to PCI-X Bridge chips which eliminates the I/O traffic bot-
tleneck between I/O boards and CPU board. The other one PCIe x4 Link
is linked to Broadcom BCM5715C dual ports Gigabit LAN chip. With
this chip, PCE-7210 may provide high throughputs for heavy loading net-
working environment.
PCE-7210 provides 4 DIMMs which may support dual channel DDR2-
400 ECC Registered RAM up to 8GB. DDR2 is double bandwidth than
the DDR RAM between memory and North Bridge. It provides same
bandwidth between CPU, North Bridge and memory which optimize the
performance for memory demanding applications. ECC Registered RAM
is for memory error detection and correction of any number of bit failures
which may provide reliable environment for industrial applications.
An optional small form factor mezzanine card provides a fully fledged
IPMI 2.0 interface with LAN and serial port support for out-of-band man-
agement (including serial console redirection over LAN).
PCE-7210 uses the ATI-7000M Graphic chip. It integrates 16M on chip
graphic memory and 2D/3D Accelerator, supports dual VGA display and
one DVI interfaces. It is enough for most graphic demand in the server
grade applications.
PCE-7210 provides two Serial ATA ports (up to 150MB/s) which support
Software RAID 0 or 1 functions. Customer may set a higher reliability
storage application without extra cost.
In addition, the PCE-7210 also provides most of the popular I/O inter-
faces such as four USB2.0 ports, two ATA-100 EIDE ports, AC'97 audio
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 141 142

Comments to this Manuals

No comments