Advantech PCE-7210 User Manual download pdf (Page 68)

PCE-7210 User Manual 52

When Enabled, the system will resume from suspend mode if Primary

IDE 0 (1) or Secondary IDE 0 (1) is active. The choice: "Enabled", "Dis-

abled".

3.7.16 FDD, COM, LPT PORT

When Enabled, the system will resume from suspend mode if FDD, COM

port, or LPT port is active. The choice: "Enabled", "Disabled".

3.7.17 PCI PIRQ [A-D]#

When Enabled, the system will resume from suspend mode if interrupt

occurs. The choice: "Enabled", "Disabled".

3.7.18 PWRON After PWR-FAIL

This option allows you to set the system so that it reboots after a power

failure. Select Former-Sts to reboot the system with its former settings.

3.8 PnP/PCI Configuration Setup

Figure 3.13: PnP/PCI configurations screen

3.8.1 Reset Configuration Data

Normally, you leave this field Disabled. Select Enabled to reset Extended

System Configuration Data (ESCD) when you exit Setup if you have

installed a new add-on and the system reconfiguration has caused such a

serious conflict that the operating system can not boot. The settings are:

Enabled and Disabled (Default).

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 141 142

No comments

Advantech PCE-7210 User Manual Page 68