Advantech PCE-7210 User Manual Page 56

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 55
PCE-7210 User Manual 40
3.4.1 Hard Disk Boot Priority
Select hard disk boot device priority.
3.4.2 Virus Warning
During and after the system boot, any attempt to write to the boot sector
or partition table of the hard disk drive will halt the system. If this hap-
pens, a warning message will be displayed. You can run the anti-virus
program to locate the problem. If Virus Warning is disabled, no warning
message will appear if anything attempts to access the boot sector or hard
disk partition. The commands are "Enabled" or "Disabled".
3.4.3 CPU L1 & L2, L3 Cache
Enabling this feature speeds up memory access. The commands are
"Enabled" or "Disabled".
3.4.4 Hyper-Threading Technology
While using CPU with Hyper-Threading technology, you can select
"Enabled" to enable Hyper Threading Technology in OS which supports
Hyper-Threading Technology or select "Disabled" for other OS which do
not support HT technology.
3.4.5 Quick Power On Self Test
Allows the system to skip certain tests while booting. This will decrease
the time needed to boot the system.
3.4.6 First/Second/Third Boot Device
The BIOS tries to load the OS with the devices in the sequence selected.
Choices are: "Floppy", "LS120", "Hard Disk", "CDROM", "ZIP100",
"USB-FDD", "USB-ZIP", "USB-CDROM", "LAN1", "LAN2" and "Dis-
abled".
3.4.7 Boot Other Device
Selectable items is "Enabled" or "Disabled". When choose "Enabled";
while the upper (3.4.6) selected items can not boot up normally. The sys-
tem will try to boot from other devices which list in the selection table in
the upper items.
3.4.8 Swap Floppy Drive
If the system has two floppy drives, choose "Enabled" to assign physical
drive B to logical drive A and vice-versa. The commands are "Enabled"
or "Disabled".
3.4.9 Boot Up Floppy Seek
Selection of the command "Disabled" will pass the Floppy disk driver
during the boot up procedure and it will speed the boot up. Selection of
"Enabled" searches disk drives during boot up.
Page view 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 141 142

Comments to this Manuals

No comments