Advantech AIMB-760 User Manual download pdf (Page 24)

ACP-4010 User Manual 12

6. For the PICMG1.0 Backplane, connect the orange-white wire from

the connector ‘CN20’ on the CPU card to the connector ‘HCN1’on

the backplane. Connect the 4-pin +12 V power connector from the

power supply to the CPU card.

Figure 2.5: Installing a full-length card

2.4 Hold-down clamp

The hold-down clamp protects all the cards from vibration and shock.

After installing all the cards, please refer to the following steps to install

the rubber cushions and the hold-down clamp.

1. There are two rows of notches on both sides of the hold-down

clamp for inserting into rubber cushions provided. One side is for

PCI cards, while the other side is for ISA cards. Depending on the

card height, the cushions can be inserted upward or downward.

After the rubber cushions have been inserted into the notches, they

will stabilize the add-on cards to protect them from shock and

vibration. (see Figure 2.6)

2. Secure the hold-down clamp into its original position.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

No comments

Advantech AIMB-760 User Manual Page 24