Advantech AIMB-760 User Manual download pdf (Page 25)

13 Chapter 2 System Setup

Figure 2.6: Installing rubber cushions and hold-down clamp

2.5 Installing Disk Drives

The APC-4010 supports two 5.25” disk drives, one 3.5” FDD, and one

3.5” internal HDD. Please refer to the following instructions to install the

disk drives.

2.5.1 Installing Disk Drives

To install the 3.5” HDD, FDD and the optical disk drive, please follow

these steps for installation and refer to Figure 2.7.

1. Release the two screws on top left of the HDD bracket and the four

screws on top of the disk drive bracket.

2. Insert the 3.5" HDD, FDD, or optical disk drive into the proper

location in the bracket and secure them with the screws provided.

3. Return the disk drive bracket and the HDD bracket with the disk

drive in the original position and fasten it with the screws.

4. Connect the suitable cables from the CPU card or the motherboard

to the 3.5” HDD, the optical disk drive, or a FDD. Then plug the

power connector into each disk drive.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

No comments

Advantech AIMB-760 User Manual Page 25